Description: This is a New Master Cylinder and Proportioning Valve Kit with Bottom Mount for 1964 1965 1966 Ford Pickup with Disc Brakes in front and Disc Brakes in rear. For use with Ford power booster or manual brakes.The master cylinder in this kit is a new factory style 1-1/8" bore master cylinder and supplied proportioning valve is equipped to work with disc/disc brake applications. NOT for use with aftermarket booster with GM master mounting area. RECENT FEEDBACK- "Worked perfect, I have a booster system on my 1966 F100. I needed to change from single master cylinder to a dual. To install front disc brakes and existing rear drum brakes."Features:1-1/8" Bore 2 Port Master Cylinder with Metering ValveCast Iron Master Cylinder1-1/8" Bore, 9/16" and 1/2" ports on left SideDisc/Disc applicationsBrass Proportioning / Combination Valve with BracketBottom Mount Bracket good for tight spacesIncludes:Cast Iron Factory Style Master Cylinder (1-1/8" Bore 9/16-18" & 1/2-20" Ports on left Side ) Brass Disc Disc Proportioning Valve Kit (with Bottom Mount Bracket)Bleeder KitThe proportioning valve has a zinc finish. This valve is also called a combination valve, as it performs all of the necessary valving functions with a disc brake conversion. These functions include the following:Proportioning:As more force is applied to the brakes and the car begins to lean forward, less braking force is needed in the rear. This valve decreases the pressure to the rear, preventing lock up.Metering:Metering is used in the front disk brake portion in the disc/drum system to delay application of the front discs allowing the slower reacting drum brakes to catch up. This provides rear stability on wet surfaces and helps prevent front pad wear. There is no metering function with the disc/disc setup.Residual Pressure:Drum Brakes require residual pressure of 10 lbs. to be held in the line. This pressure keeps the brake shoes close to the drums giving you a more firm pedal feel. The disc/disc setup does not require this pressure.System Failure Switch:This valve has a system failure switch that will alert you when half of your braking system is not working properly.Please Note: Professional Installation is Highly Recommended (No Instructions Included)
Price: 97.65 USD
Location: Hudson, Iowa
End Time: 2024-08-06T18:19:13.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Returns Accepted: ReturnsNotAccepted
OE Spec or Performance/Custom: Performance/Custom
Item Description: Master Cylinder & Bottom Mount Proportioning Valve
Fitment Type: Direct Replacement
Master Cylinder: Cast Iron, 1" Bore, 9/16 & 1/2" Ports
Interchange Part Number: MCK7161
Brand: Gearhead
Type: Master Cylinder
Items Included: Master Cylinder Cap, Mounting Hardware
