4K HDMI EDID Emulator Passthrough AdapterFemale Port Connected to an Externa

Description: Product Description: 1. The HDMI EDID emulator maximizes the communication between the video source and the HDMI display through the EDID emulator, and can pass the video signal losslessly, up to HDMI 2.0 (3840x2160@60HZ), compatible with RGB and YCbCr, not compatible with HDCP. 2. Can fix signal connection issues between video source and monitor (Display/Switcher/KVM), headless function to keep HDMI connection always active, prevent desktop rearrangement when monitor is turned off, and can fix other states EDID missing or confusing issues. Supported resolutions: 3840 x 2160@60Hz (with HDMI2.0) 2560x1440@60Hz 1920x1200@60Hz 1920x1080@60Hz （default） 1680x1050@60Hz 1600x1200@60Hz 1600x900@60Hz 1440 x 900@60Hz 1366 x768@60Hz 1280x800@60Hz 1280x720@60Hz 1024x768@60Hz 800x600@60Hz Notice:4K resolution simulation requires HDMI 2.0 ports, RX460, GTX1050 or above (only supports single-computer graphics cards, not integrated graphics computers), and the resolution exceeding the GPU cannot be simulated. Quantity: HDMI EDID Emulator Passthrough Adapter （1 pack） HDMI edid emulator-Bi-directional transmission signal,Signal source can be male or female,When your display is in multi-screen splicing mode, if one of the wires is loose or the screen is removed, the computer system will not re-identify or arrange the remaining desktops, Instead, the current settings are fixed. Plug & Play-No drivers,no software, no powered,Support hot swap.Low power consumption.The setup is very simple, just plug it into the KVM inline with your computer's HDMI, and every time you switch the signal input in the KVM to another device, the Windows system won't reset the monitor. Fixed EDID - It still passes video and audio signals correctly every time the device shuts down or power is started, stopped, toggled, or renegotiated for other operations. And to speed up the negotiation when the display is frequently turned off or on.The HDMI EDID emulator lock can be used to close the laptop lid remote control after specifying the resolution, and can be used as a virtual monitor when not using an external monitor. The screen client that can stably connect to 1080p/4K monitors is compatible with Mac mini, Raspberry Pi, NUC, Jetson Nano, keeping the monitor's EDID active when each device is accessing them remotely, works perfectly.the resolution supports 800x600@60Hz~3840x2160@60Hz. Even up to 4K -4096x2160@60HZ. Even with the real monitor turned off or disconnected, the emulator will tell Windows that it's still connected and Windows won't try to rearrange the desktop. It actually works perfectly with a DP (displayport/USB C) to HDMI adapter and doesn't require extra power. 24 hours technical maintenance consultation, you will get the fastest reply, HDCP is not supported!

Price: 10.63 USD

Location: Lathrop, California

End Time: 2024-12-18T16:30:10.000Z

Shipping Cost: 0 USD