Apple II Gotek Adapter HXC modded goteks w/ Apple II firmware 5.25" Emulation!

Description: Apple II HXC modded Gotek Adapter This adapter allows you to connect an HXC firmware modded Gotek to your Apple II computer to emulate a 5.25" floppy drive and load disk images without the need of a real floppy drive. Supported Models include: Apple II, Apple II plus, Apple IIe, Apple IIc, Apple IIc Plus, Apple IIgs, and Macintosh with Apple IIe card. This adapter makes it so much simpler as you no longer have to build your own cable. Without this adapter you would need to wire up the below pinout yourself:The adapter creates all of these pinout connections for you : Apple II floppy interface <------------------> Gotek floppy interface (Internal 20pins / Ext DB-19) PH0 (Int pin 2 / DB19 pin 11) <------------------> UART RX Pin (J4) PH1 (Int pin 4 / DB19 pin 12) <------------------> UART TX Pin PH2 (Int pin 6 / DB19 pin 13) <------------------> /DIR (18) PH3 (Int pin 8 / DB19 pin 14) <------------------> /STEP (20) /WREQ (Int pin 10 / DB19 pin 15) <------------------> /WGATE (24) SEL (Int pin 12 / DB19 pin 16) <------------------> /SIDE1 (32) /DRVEN (Int pin 14 / DB19 pin 17 or pin 9 *) <-------> /DS0 (10) RD (Int pin 16 / DB19 pin 18) <------------------> /RDATA (30) WR (Int pin 18 / DB19 pin 19) <------------------> /WDATA (22) WRPROT (Int pin 20 / DB19 pin 10) <------------------> /WPT (28) Power : VSS/GND (Int pins 1,3,5,7 / DB19 pins 1,2,3 ) <---------> Gotek VSS power input (Power pins 2, 3) + Gotek floppy interfaces pins 33, 27, 23, 21. +5V (Int pin 11 / DB19 pin 6) <---------> Gotek +5V power input (Power pin 1). *****My HXC modded gotek is NOT INCLUDED! Its only shown to demonstrate the adapter. You need to supply your own HXC modded Gotek and flat ribbon cable***** All you need is a simple 2X10 (20 pin) female to female IDC ribbon cable which can be found for a couple dollars online. Please follow this link to the HXC website for information and videos on how to modify a Gotek for use with HXC firmware and how to load up Apple II disk images: https://hxc2001.com/docs/gotek-floppy-emulator-hxc-firmware/pages/apple.html Apple II hxc support is a relatively recent addition and is in active development with new features being added. Please reach out to Jeff at HXC forums for any questions or requests for Apple II development. Your participation helps make a better product! Please see photos and contact me with any questions. Over 23+ years of selling on ebay!

Price: 26.75 USD

Location: New Milford, Connecticut

End Time: 2024-10-29T19:08:58.000Z

Shipping Cost: 5.85 USD