Ds1 Keeley All Seeing Eye + Ultra Mod Kit INSTRUCTIONS INCLUDED FREE SHIPPING US

Description: Please Make sure you have a moddable DS1 before purchasing my kit. the easiest way to tell is to remove the four bottom screws and look inside. if it has a ton of space and a small board towards the top, it cannot be modded.NOW WITH FREE SHIPPINGSHIPS FROM US DS1 Mod Kit Is based on the All Seeing Eye + Ultra Mods using most of the same High Quality Components that Keeley used and using some parts the MIJ DS1's have. All the Caps and resistors i sell are tested before being shipped. They are all within 5% tolerance!! Most of the time if a cap is rated .01uF, I try to give my customers caps that read exactly .01uF.My kit blows all the other kits out of the water. I included a demo video up top with the images. I usually have high quality panasonic caps to make sure your pedal will sound as best as it can. I include all parts needed for the mod to work. Comes with detailed instructions pdf format with pictures to complete mod.PLEASE LEAVE A REVIEW ONCE YOUR BUILD IS COMPLETE! IF YOU LIKE THE RESULTS OF YOUR BUILD I CAN PROVIDE KITS FOR MORE PEDALS IF YOU DO! I REALLY APPRECIATE IT! What you receive: 8x Polypropylene Capacitors1x Electrolytic Capacitor 3x 1/4w 1% metal film Resistors2x spdt mini toggle switches (if carling switches arent available, I will use generic mini toggles) i am currently out of carling switches as of March 26, 2023.Clipped lengths of 26-30 gauge wire2x 1S2473 Diodes (ones in the original MIJ DS1)1x BAT46 Diodes for added flavor1x clear blue 3mm LED1x Diffused red 3mm LED(I also test the LEDs before shipping, I know they work before I ship.)LED bracket or clip.1/8 inch shrinkwrap You need your own tools to complete this mod, I do not provide any of that Tools Needed: Soldering ironSolder 60/30 tin/lead ratio (Recommend 63/37)A Solder sucker or Copper Braid for Desoldering Drill with 1/4 inch bit and 3/8 inch bitPhilips head ScrewdriverAn 8mm,10mm, 11mm, 12mm or 1/2 inch socketsWire Cutters/StrippersA Coffee mug or cup that will not fall overLight SourceAttention to detail Optional:FluxMagnetic Screwdriver (phillips Head)Punch (For Drilling Holes)Hammer or MalletDesoldering Iron (Highly Recommended) You can buy one for 10 bucks on ebay and they are a lifesaver!Lighter or heat gunFew inches of 26-30 gauge wire (I provide enough but you may need more depending on if a mistake is made) Comes with Step-by-Step Instructions in PDF format with pictures and very detailed explanations.Always test the pedal after Finishing each section when building. that way it is easy to troubleshoot if something goes wrong. I will try to help as best i can. Feel free to message me if you need help.I have one modded DS1 for sale with the exact same parts that are in this kit. Check out my other Listings. Feel free to ask me any questions before canceling my order or contacting ebay regarding any sales. Just contact me and I will do what i can to make it right. Thanks allowing me to help you bless the world with the magic of tone. You buds will not believe that this tone is really coming from your ds1 and they will surely envy you. SD1 KIT IS NOW AVAILABLE ON MY STORE THANKS!I have a Built Modded DS1 with the exact same parts that are in this kit. Check it out in my store.Have a Modded SD1 using the same parts as in my kits I sell here. Demo and listing in my store.

Price: 25 USD

Location: Fullerton, California

End Time: 2024-01-06T01:30:19.000Z

Shipping Cost: 0 USD