Description: DSLRKIT MID6P2UE Passive PoE Injector Switch Support EXT mode, max Network Cable length to 250 meters Suitable for Hikvision,DAHUA and other brands with 802.3af/802.3at PoE Powered Devices(PD) NOTE. When EXT mode enable, the Max bandwidth for the Power Link (PoE) port 1-6 network port will be reduced to 10Mbps for each one. Please check your IP CAMERA's bit stream setting. We recommend the value does not over 8Mbps(8192Kbps). (The up-link is not affected, it will always working at 100Mbps max speed) 8 Ports (2Uplink, 6 PoE) 10/100Mbps Midspan Mode-B Unsolicited Power(4,5+/7,8-) Compatible IEEE 802.3af/at, Per port Max 50Watt Wall Mount 48V 75Watt(Max.90W) (Please select according your device power consumption, in order to ensure device stable running, the total power consumption should not exceed 75watt of the power supply) If your camera is with word “12V/PoE” as this picture shows, then please select this 48V(or 52V) PoE Switch, do not select 12V PoE Switch. Because "12V/PoE" means it can offer power supply to camera via 12V DC port or 48V(or 52V) PoE Ethernet port This is an Passive Power Over Ethernet of 8 port 10 / 100Mbps-T Ethernet switches, including 6 unsolicited PoE Ethernet ports and 2 Uplink ports. With an external 110V-240VAC to 48VDC power supply adapter, any one of the 6 port can provide output power, each Ethernet port can provide network transmission speeds of up to 10 / 100Mbps , with Cat5 / 5e / 6 network cable. Which compatible with IEEE 802.3af/at Mode-B(4,5+/7,8-) POE switch device, but it does NOT include the 802.3af/at compliant detection feature. It supplies power NO MATTER WHAT, so don't plug the ports "1~6 " side into anything that isn't ready for it. This POE switch only support 10/100M connection, PoE ports do not support Gigabit ethernet connection, because "1~6 " port using 4,5,7,8 pin as power transfer, Please do not connect any "NONE PoE gigabit ethernet device and Uplink device" on "1~6" ports, this will damage your device. Gigabit(10/100/1000Mbps) ethernet device Please do not access "Power Link port" this will damage your device. Compatible all 802.3af/at device as Wireless Access Point, IP Phone, IP camera, Gateway , Switch, or More..... Features: 8 x 10/100Mbps Auto-negotiation Fast Ethernet RJ-45 ports with 6-Ports PoE function Support EXTEND mode, max Network Cable length to 250 meters. Midspan Mode-B Unsolicited Power(4,5+/7,8-) Supports PoE power up to 75W for all PoE ports, Per port Max 48V 1A or 50Watt Supports PoE IEEE802.3af/at compliant Powered Device (PD) Each port supports auto MDI/MDIX, so there is no need to use cross-over cables. Full/half duplex transfer mode for each port. Specification: ALL Port: Standard 10/100Mbps Ethernet port. Support 10Mbps Ethernet and 100Mbps Fast Ethernet, can operate in full-duplex or half-duplex mode,must work with 4 pairs UTP Cat5/5e/6 cable。 Port 1-6: any supported unsolicited power on pairs 45-78 pins compliant Powered Devices (PDs) Power LED LED ON: power on. LED OUT: power off Green Light LINK/ACT LED ON Indicates the port is connected to a network device and has been started LED OFF Indicates that this port is not connected to a network device or has not been started Standard IEEE 802.3 10BASE-T Ethernet IEEE 802.3u 100BASE-TX Fast Ethernet IEEE 802.3x Full-Duplex flow control Protocol CSMA/CD Ethernet Data Transfer Rate Ethernet: 10Mbps (Half Duplex) 20Mbps (Full Duplex) Fast Ethernet: 100Mbps (Half Duplex) 200Mbps (Full Duplex) Network Media(Cable) 10Base-T(EXTEND mode): UTP category 5e, 6 cable (maximum 250m) EIA/TIA-568 100Ω STP (maximum 250m) 100Base-TX:UTP category 5, 5e cable (maximum 100m) EIA/TIA-568 100Ω STP (maximum 100m) PoE Power on RJ45 Power +: pin 4 & pin 5 ; Power -: pin 7 & pin 8 DC Output: 52V, Per port Max 1A or 50Watt, 4 POE ports Total Max. 75Watt Number of Ports 8 x 10/100Mbps Auto-Negotiation RJ45 ports with 6 PoE enabled (port-1 ~ port-6) Power Input AC Input: 110V ~ 240VAC, 50Hz ~ 60Hz. DC OutPut: 48V/2A Power Consumption 3.2 Watts (max. no PD connected) According to the actual power consumption of equipment Temperature Operation Temperature:0 ~40℃ (32 ~104℉) Storage Temperature: -40 ~70℃(-40 ~158℉) Humidity Storage Humidity 5%~90% non-condensing, Operating Humidity 10%~90% non-condensing Product Dimensions 140mm W x 65mm D x 28mm H RAM Register Capacity 64K bytes per device MAC Address List 1K entries per device Frame Forward Rate 10Mbps Ethernet: 14880pps/Port 100Mbps Ethernet: 14880pps/Port Item Included: DSLRKIT MID8P2UE 8pots 6PoE Unsolicited(Passive) PoE switch x1 AC Power Adapter(DC OutPut: 48V/2A) x1 AC Power Cable x1 AC power plug is US or EU type,if you need other type (AU or UK),Please leave a message. 12 Months Warranty from the date of purchase.
Price: 37.99 USD
Location: Shenzhen
End Time: 2024-11-23T09:15:51.000Z
Shipping Cost: 3.3 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Brand: DSLRKIT
Form Factor: Standalone
Ethernet Technology: Fast Ethernet (100-Mbit/s)
Type: Ethernet Switch
Maximum Data Transfer Rate: 100Mbps
Network Management Type: Unmanaged
Model: MID6P2UE
MPN: Does not apply
Country/Region of Manufacture: China
Layer: 2
Number of LAN Ports: 8
Interface: Ethernet (RJ-45)