ENVE SES 3.4 Disc Carbon Tubeless Road Wheelset

Description: This is a used and in very good condition Enve SES 3.4 wheelset, intended for use with disc-brake equipped road bikes. These are the previous generation hook bead rims, so they are compatible with standard clinchers, as well as tubeless clincher tires. The original tubeless valves are included, and the rims have new Teravail(Whisky) rim tape installed. The hubs are centerlock disc DT Swiss 240s with EXP rear driver. They currently have an XDR freehub installed, but I have a Shimano 11 road freehub (compatible with 10-12 speed Shimano cassettes) that can be swapped out if preferred. I can also sell both freehubs with the wheels. The bearings in both hubs (and both freehubs) feel like new, as the mileage on these wheels is relatively low. The old decals had been removed, so new factory decals were installed on the rims. There are two extra decals for each rim included.These wheels were professionally inspected and trued (checked laterally, vertically, dish, and tension balance) before listing and are in good shape. As a disclaimer - as disc wheels with no machined sidewall, these aren't perfectly true (but safely within 1mm). There's also a possibility that installation of tires (tighter fitting tires, especially tubeless) will slightly affect the trueness of the wheels, since they are equipped with internal nipples and can only be trued with the tires removed.

Price: 1500 USD

Location: Tucson, Arizona

End Time: 2024-11-13T23:18:02.000Z

Shipping Cost: 0 USD