Description: Furman - PL-8 Power Conditioner Power line disturbances are real, and they are inevitable. According to Consumer Reports (November, 1994), "One significant surge a day is the norm. High-exposure areas may experience perhaps a hundred smallish spikes a day." Proper protection is essential for costly equipment, even more so if it is frequently moved from location to location.The PL-8 Power Conditioner/Light Module is the perfect accessory to any equipment rack, providing the basic power protection essential to every audio or video system. Install a PL-8 in the top slot of your rack, and the 8 switched AC outlets on the rear panel will power up all your equipment while its 2 slide-out light fixtures provide discreet, illumination of their controls on stages, in studios, or in any dark place. A dimmer control lets you adjust the lamp brightness to just the right level.Features2 slide-out, swiveling light fixtures for rack illuminationDimmer control for lamp brightness8 accessory outlets in rear controlled by front switchTriple-mode varistor spike and surge protectionRFI filtering15-amp rating, with circuit breakerSeparate switch for lampsThe PL-8 protects your delicate electronic equipment by combining a high voltage surge and transient suppressor with an RFI/EMI interference filter. The fast-acting suppression circuit responds in nanoseconds, clamping spikes and surges to safe levels. The filter works to prevent noise from fluorescent lights, electric motors, radio transmitters, and similar sources of "electronic pollution" from leaking from the AC line into sensitive analog or digital circuits.The PL-8's lamps come supplied with 7-watt night-light bulbs. Replacements are readily available in 4-watt or 7-watt sizes at most supermarkets and hardware stores. Colored Christmas tree bulbs may also be used. Bulbs are easily replaced without removing the unit from the rack by unscrewing the cap on the end of each light tube.The PL-8 has a master switch for the rear outlets that glows red when the power is on. There is also a separate switch for the lamps, allowing you to check your equipment settings before applying power to it. The front-panel circuit breaker can be easily and quickly reset should the PL-8 be overloaded.
Price: 50 USD
Location: Moss Landing, California
End Time: 2024-11-24T23:46:50.000Z
Shipping Cost: 10 USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Brand: Furman
