RCF SUB8008-AS Powered Dual 18" Subwoofer & 2x RCF NX985-A 3-Way Powered Speaker

Description: NX 985-A Professional Three-Way Active Speaker Up to 138 dB 2100W Features Up to 138 dB Sound Pressure Level2100W Class-D Amplifier40-20000 Hz linear frequency response1.75" Neodymium Compression Driver with Peek diaphragm8" Midrange, 2.5" v.c.15" High Power WooferBass Motion Control and FiRPHASE processingM10 Rigging PointsIP Rated Powercon TRUE1 TOP IN/OUT NX 985-A is a three-way active speaker masterfully engineered from the ground up to deliver stellar audio performance for Bands, DJs, Clubs, and Rental Companies. The best-in-class combination of RCF premium transducers and a two-channel 2100W amplifier produce coherent 100° x 60° coverage for the listening area with up to 138 dB SPL of distortion-free sound. The three-way design features a 1.75" neodymium compression driver with a constant directivity waveguide, 8" cone midrange on a phase-coherent waveguide, and a 15" high power woofer. Used as a stand-alone speaker, flown, coupled with another NX 985-A or combined with the RCF SUB 8008-AS subwoofer, the NX 985-A delivers extreme SPL output at all frequencies with high performance and reliability. The rugged, tour-ready, high-quality all-plywood cabinet is easy to carry and secure to install using the dedicated rigging points available. Power that moves The most powerful amplifier in its class. RCF's improvements in transducer design make them stronger and more powerful. With 2100W of power, the 2-channel NX 9 Class-D amplifier is 50% more powerful than previous models, able to manage extreme sound pressure levels with an ultra-fast attack, realistic transient response, and very low heat loss. NX 9 is energy-efficient so there's no need for a cooling fan - the amplifier is attached to a solid aluminum heat exchanger in the rear of the cabinet - with no moving parts. The input circuit features a new low distortion design with an advanced safety limiter, maintaining the true character of the input signal at all levels. All NX 9 amplifiers are designed according to EN62368-1 for maximum safety and present a Switch Mode Power Supply section joining high-efficiency with minimum weight. Superior transducers Lightweight and powerful, RCF drivers are a reference in high performance. All transducers are designed by RCF engineers in Italy for maximum reliability and perfectly matched components. ? The extended clarity of the 1.75" compression driver features a neodymium magnet for improved current handling and reduced weight. The best-in-class peek dome and the Polyamide/Kapton voice coil handle extreme power levels with very low distortion. ? The midrange section adds detail and vocal clarity with a high-power 8" cone midrange on a constant directivity waveguide. One high-power 15" low-frequency woofer with a new advanced transducer design gains more stability over higher currents, with less distortion, fast transient response, and better heat handling. Bass Motion Control When searching for an extended bass with enhanced performance, RCF engineers found a way to remove the high-pass filter, replacing it with a forward-thinking approach. Introducing BMC (Bass Motion Control), the newly advanced woofer excursion management feature. The speaker equipped with BMC can handle the lowest audible frequencies without affecting the woofer stability, with extended linearity and better sound integrity. The BMC method works by creating a complete map of the dynamic behavior of the woofer, to generate a custom algorithm that only limits over-excursions. This gives total freedom of signal reproduction to the transducer. When high-pass filters normally protect the woofer motion from becoming destructive but change the phase behavior, the new BMC algorithm breaks conventional rules. New perspective on linearity RCF speakers are designed using a proprietary and advanced digital FiR technology, conceived to deliver transparent sound, absolute clarity, and perfect imaging to the listener. The special FiRPHASE filters allow for coherent distribution of sound for all listeners without phase distortions, ensuring minimum latencies in the system. SUB 8008-AS Pair one or two NX 985-A with SUB 8008-AS to create a high-power four-way sound system for any application that requires an earth-shaking response and extreme clarity on the entire frequency range. Specifications Configuration Active 3-Way Enclosure Type Bass-Reflex Loudspeaker/Floor Monitor Total Power Capacity 2100 W Peak Amplifier Power Rating LF: 1400 W Peak MF: 1 x 500 W Peak HF: 200 W Peak Amplifier Class Class-D Drivers HF Driver 1 x 1" / 25.4 mm Polyimide Compression Driver HF Voice Coil 1.75" / 44.45 mm MF Driver 1 x 8" / 203.2 mm MF Voice Coil 2.5" / 63.5 mm LF Driver 1 x 15" / 381 mm Woofer LF Voice Coil 3" / 76.2 mm Magnet Neodymium Performance Frequency Response 40 Hz to 20 kHz Maximum SPL 138 dB (Peak) Coverage Angle 100° H x 60° V Input Sensitivity +4 dBu to -2 dBu Protections RMS, Signal Limiter, Thermal Connectivity Audio I/O 1 x Combo XLR-1/4" TRS Female Balanced/Unbalanced Input 1 x XLR 3-Pin Male Balanced Thru/Output Network I/O None USB None Wireless Connectivity None Signal Processing Crossover 1200 Hz (Internal) 320 Hz (Internal) EQ None Parametric EQ None Semi-Parametric EQ None Dynamic Processing Soft Limiter Alignment Delay None Phase Adjustment None Digital Signal Processing FIR Filter, Venue Settings Power AC Input Power 100 to 120 VAC, 60 Hz AC Power Connector 1 x PowerCON TRUE1 Input (Locking) 1 x PowerCON TRUE1 Output (Locking) Physical Mounting 3 x M10 Fly Point (Top) 1 x M10 Fly Point (Each Side) 1 x M10 Fly Point (Bottom) 2 x M10 Fly Point (Rear) Handles 1 x Each Side Cooling Convection, Heat Sink Construction Material Plywood, Stainless Steel Grille Dimensions 42.3 x 18.7 x 18.2" / 1074.4 x 475 x 462.3 mm Weight 99.2 lb / 45 kgRCF SUB 8008-AS 4400W Powered Dual 18" Subwoofer For Live Sound or DJing Features Up to 137 dB Sound Pressure Level4400W Class-D Bi-Amplification30-120 Hz linear frequency response2 x 18" High Power WoofersIP Rated Powercon TRUE1 TOP IN/OUT8 Crossover Presets and 4 Cardioid Presets The SUB 8008-AS is a double 18? high power active subwoofer for live bands, DJs, Clubs, and Rental Companies. It employs a state-of-the-art transducer featuring a high-power ceramic magnetic circuit with a 4? voice coil. The power amplifier manages extreme currents up to 4400W delivering sound pressure levels up to 137 dB with exceptional headroom. The ultra-fast attack with accurate power handling is managed with high efficiency, producing a very low heat loss for silent and fan-less cooling. Built specifically for demanding live sound applications with deep, powerful bass response. Rear panel controls include 12 presets, crossover frequency, polarity switch, Deep/Punch selection, cardioid, and output delay settings. The tour-ready, rugged all-wood cabinet with scratch-resistant polyurea coating is easy to carry and secure for installation. With its rugged construction, sound quality, and high power, SUB 8008-AS is perfect in mid to big-sized venues and touring applications. Legendary subwoofers RCF subwoofers are the first choice of many sound engineers, thanks to the very high SPL levels at very low frequencies, small dimensions compared to the competitors, self-powered design, internal delay control, long-term reliability, cardioid configuration options, and impressive size/weight to SPL output ratio. Your crowd will be able to live an engaging immersive experience in both live sound or DJing applications. Industry-Leading Subs Lightweight and powerful, RCF woofers are a reference in high performance. RCF Precision Transducers engineers have developed new specific magnet sizes and molds to optimize magnetic flux while maintaining a low weight. The 18", 4.0" voice coil magnetic circuit topology is capable of delivering the highest, balanced level of performance in three specific areas: maintenance of a consistent, high integrity magnetic flux gap, exceptionally low distortion and efficiently integrating the magnetic circuit in a minimum weight design. The T-pole design optimization generates the minimum amount of flux modulation in the magnetic assembly during typical voice coil movement within the gap. Power that moves The most powerful amplifier in its class. RCF's improvements in transducer design make them stronger and powerful, so the amplifier follows the evolution. With 4400W peak power, the 2-channel Class-D amplifier is able to manage extreme sound pressure levels with an ultra-fast attack, realistic transient response, and very low heat loss. So energy-efficient that there's no need for a cooling fan - the amplifier is attached to a solid aluminum heat exchanger in the rear of the cabinet - with no moving parts. The stereo input circuit with crossover features a new low distortion design with an advanced safety limiter, maintaining the true character of the input signal at all levels. RCF amplifiers are designed according to EN62368-1 for maximum safety and present a Switch Mode Power Supply section joining high-efficiency with minimum weight. Tour-ready workhorse SUB 8008-AS is suitable for a wide range of live sound applications. The rugged all-plywood cabinet is easy to carry and two or more cabinets are stackable and light-weight, for easy set-up and tear down, thanks to the ergonomic handles with rubber grip on each side. Two M20 threaded pole mounts on the top and side allow the cabinet to be used in vertical or horizontal configurations. The heavy-duty polyurea coating, the powder-coated metal grille, and the rugged structure of the cabinet withstand long-term use and transportation. Separate housing for the amplifier guarantees component efficiency and reliability. An acoustically transparent sound foam backing on the inside of the grille ensures protection from dust and humidity. Due to the frontal vented ports, the subwoofer can also be used in recessed spaces. Specifications Configuration Active Subwoofer Enclosure Type Bass-Reflex Line Array Subwoofer Total Power Capacity 4400 W Peak Amplifier Power Rating 4400 W Peak 2200 W Program 1100 W RMS Amplifier Class Class-D Drivers MF Driver None LF Driver 2 x 18" / 45.7 cm Woofer LF Voice Coil 4" / 10.2 cm Magnet Neodymium Performance Frequency Response 30 Hz to 120 Hz Maximum SPL 137 dB Input Sensitivity +4 dBu to -2 dBu Protections Output Limiter, Thermal Connectivity Audio I/O 2 x XLR 3-Pin Female Balanced Line Input (Lockable)2 x XLR 3-Pin Male Balanced Line Thru Network I/O None USB None Wireless Connectivity None Signal Processing EQ Yes Parametric EQ None Semi-Parametric EQ None Alignment Delay Yes Phase Adjustment Yes Digital Signal Processing Delay, FIR Filter, User Settings Power AC Input Power 100 to 120 VAC, 60 Hz AC Power Connector 1 x PowerCON TRUE1 Input (Locking)1 x PowerCON TRUE1 Output (Locking) Physical Mounting 2 x M20 Pole Socket (Side, Top) Handles 2 x Each Side Cooling Convection Construction Material Metal Grille, Plywood Certifications CE *as per Manufacturer Dimensions 46.5 x 27.6 x 21.7" / 118.1 x 70.1 x 55.1 cm Weight 176.3 lb / 80 kg

Price: 9297 USD

Location: Brooklyn, New York

End Time: 2024-08-28T06:20:49.000Z

Shipping Cost: 0 USD