RME Babyface Pro FS USB Audio Interface (Demo / Open Box)

Description: Category 500 Series Modular Synth Keyboards Microphones Preamps Dynamics Equalizers Monitoring Computer Audio Interfaces Software Beat Production RME Babyface Pro FS USB Audio Interface (Demo / Open Box) The RME Babyface Pro FS USB Audio Interface is a 24-channel 192 kHz professional high-precision USB audio desktop interface. Four years ago the Babyface Pro again demonstrated RME’s absolute commitment to superior craftsmanship, not only in audio circuits and driver development, but also in mechanics. Created with the highest precision from a block of aluminum, this high-end portable interface incorporated newly designed analog and digital circuits. Its innovative energy saving technologies provided supreme fidelity with no compromises in level, noise or distortion. New and improved in the Babyface Pro FS: +19/+4 dBu switch on the bottom adds a direct way to reduce the output level, thus improves SNR for sensitive active monitors, avoids distortion/overload, and helps to keep TotalMix FX faders near 0 dB instead of high attenuations Full SteadyClock FS circuit as in the ADI-2 Pro FS for lowest jitter and highest jitter immunity 3.5 mm TRS phones output power rises from 70 mW to 90 mW. THD of both phones outputs improved by up to 10 dB. Uses same output op-amps as ADI-2 Pro now. Output impedance of 3.5 mm TRS lowered from 2 Ohms to 0.1 Ohms Mic inputs SNR improved from 112.2 dB to 113.7 dB, TRS Line inputs SNR improved from 114 dB to 116.3 dB (120 dBA), THD Line inputs improved by 8 dB 6 samples less latency on the AD side by new ADC (5 samples AD, 7 samples DA All the above improvements were achieved without raising the units power consumption K-slot for theft protection ADI-2 Series Headphone Power The two headphone outputs, offering TRS and mini-jack sockets in parallel, have completely separate driver stages to perfectly match low and high impedance headphones, guaranteeing pristine sonic results no matter what type of headphone is used. The 3.5 mm TRS phones output power rises to 90 mW. THD of both phones outputs improved by up to 10 dB. and uses same output op-amps as ADI-2 Pro now. Finally the output impedance of 3.5 mm TRS was lowered from 2 Ohms to 0.1 Ohms. Full range capture - Improved Mic & Line Inputs For the main I/O RME have designed a XLR socket, which integrates seamlessly into the housing and saves space. Two digitally controlled preamps provide individually switchable 48V phantom power. These circuits feature a gain range of 76 dB, adjustable in steps of 1 dB, including a relay-driven PAD, resulting in exceptional EIN (Equivalent Input Noise) performance as well as line overload protection, and enough gain for even the lowest level microphones. Babyface Pro’s incredibly efficient design almost never requires an external power supply – it’s perfectly stable on USB 3 bus power, and also most USB 2 ports, with no degradation in any technical specification. This makes it perfect for mobile recording, even with a pair of your favorite condenser microphones. The comprehensive feature set continues with an optical TOSLINK I/O; use as either an ADAT port with SMUX support or SPDIF for sessions up to 192 kHz. In combination with an external ADAT converter, the Babyface Pro fully supports 12 analog inputs as well as 12 outputs, making it ideal for both live and studio multi-track applications. You can plug any instrument, line or high impedance, into Babyface Pro’s jack inputs 3 & 4. Record your guitar on the go, with no additional hardware required. MIDI I/O via an included breakout cable completes the package. More Pro level Performance with SteadyClock FS In digital audio, the clock frequency is an essential factor, as it creates the correlation between the audio bits and the time reference. Unfortunately, the clock frequency is not always as stable as desired. The Babyface Pro FS offers the full SteadyClock FS circuit as in the ADI-2 Pro FS for lowest jitter and highest jitter immunity. Excellent performance in all clock modes and High Quality Analog Conversion to hear your mix as it is. Digital format conversion in RME products are done without any loss or degradation, and SteadyClock FS ensures your sonic image will never experience degradation. This helps to optimize recordings and mixes because the soundstage has more depth and clarity. Mixing & Routing with TotalMix FX & TotalMix Remote Like all the latest RME interfaces, the Babyface Pro FS also includes the powerful digital real-time mixer TotalMix FX. It allows fully independent routing and mixing of input and playback channels to all physical outputs. Independent stereo submixes plus a comprehensive Control Room section offer unrivalled monitoring capabilities and unsurpassed routing flexibility. Babyface Pro FS ships with RME’s TotalMix FX, available for Windows and Mac OS X. An iOS version is available as well. This amazingly versatile software allows you to use Babyface Pro in any situation. For example mixing your guitar and vocals to headphones has never been easier. The FPGA-based DSP mixer adds a flexible, 3-band parametric equalizer to all inputs and outputs. Reverb and delay FX are also available. Additionally RME’s latest software, TotalMix Remote, enhances the power of the Babyface Pro FS by enabling remote control via iOS, PC or Mac. With a straightforward set up process — simply enter the IP address of the computer you would like to control with TotalMix Remote and get going — users can quickly adjust any aspect of TotalMix FX on a host system while walking around the studio with their tablet, or from a control room located elsewhere in the facility. The FPGA-based DSP mixer adds a flexible, 3-band parametric equalizer to all inputs and outputs. Reverb and delay FX are also available. Latest generation low latency AD/DA converters, combined with RME’s unique SteadyClock FS technology, result in exceptional specifications that will satisfy the most demanding of professionals. Combining a huge feature set with sonic excellence and intuitive control, whether for the studio or on the move, the RME Babyface Pro is the most comprehensive and versatile compact audio interface ever built. Easy to use and perfectly Stable Straight to the core without interference: the reference design of the Babyface Pro leaves nothing to be desired. RME devices are designed to conserve music as it is. Audio signals are passed in their entirety, nothing added, nothing taken. For the new Babyface, the audio circuits have been improved to meet even highest gain levels with best dynamic range. The clever user interface is informative and clearly laid out. It makes access to every feature and configuration mode of the Babyface Pro intuitive and easy to use. RME USB - Transport audio with lowest latency and industry leading stability As part of RME’s product philosophy, they always further develop and optimize their core technology. RME have paved the way for multichannel audio and were the first to deliver professional performance over USB 2.0. They place a high level of attention on the development of reliable, stable, and regularly updated drivers for their products and an unwavering focus on audio quality. This guarantees your Babyface Pro FS will be never outdated and always updated. And because RME Audio develops its own interface core, it’s not dependent on 3rd parties for upgrades, modifications or bug fixes, so customers can use latest operating systems without interruption or delay. Included Free with all RME Audio Interfaces: TotalMix FX: Comprehensive mixing and monitor control software for Mac, PC, and iOS TotalMix Remote: Control your RME Audio Interface over network DIGICheck: Ultimate test, measurement, and analysis tool Driver Support: Constant updates and improvement About Us Since 1993, we have been committed to equipping our customers with the very best gear, advice, and personal service anywhere. We believe that great sound can be achieved at any budget. We also believe that the ambitions of our customers should always come first. For us, it's about building long-lasting relationships, not just selling gear. And over the years, those beliefs have turned customers into friends and family. Whether you're just starting out, or a seasoned pro, we're here for you, no matter where your audio travels may take you. Shipping Policy Free ground shipping to the lower 48 states Via FedEx. All of our items ship via FedEx. On checkout, it may look like you are selecting a UPS shipping method, but the item will be shipped via the equivalent FedEx method. Import Duties and Tax Since import taxes and/or duties that your government might impose on products shipped from the United States may apply, you (the customer), are solely responsible for shipping charges, taxes, and duties, once goods arrive in your country. Undeliverable/Rejected Package If your package was rejected by your local Customs Bureau or the shipment could not be delivered and was returned to Vintage King Audio for any reason, we are not responsible for the shipping costs. Free Extended Warranty All new items that Vintage King carries are subject to our FREE extended warranty protection. Basically, if the manufacturer offers a 1-year warranty on your product, then you are covered under the same warranty terms for a total of 2 years from the time of initial shipment. Likewise, if the manufacturer offers a 5-year warranty, then you receive a total of 6 years of coverage when purchased through Vintage King. We add 1 year to your standard manufacturer's warranty period, FREE of charge, whatever the manufacturer's warranty period may be. Duties and tax for warranty and damage replacement items International Duties and tax for warranty and damage replacement items may apply. Even though you may have paid shipping, taxes or duty on your original order, it is IMPORTANT to understand that your government may impose duties and taxes for warranty items or replacement items damaged during shipment from the United States for the new order. You (the customer), are solely responsible for shipping charges, taxes, and duties, once goods arrive in your country. Used Item Warranties Vintage King offers an industry-leading level of technical service and warranty support on our used and vintage items. Our used item warranty periods are as follows: Analog Outboard Gear 1 Year Microphones 1 Year (excluding capsules, tubes, and ribbon elements) Speakers 1 Year (excluding drivers) Digital Outboard Gear 30 Days Return Policy We do our best to help you choose the perfect gear, but if you don't love it in the first 30 days after receipt, please contact us through eBay for a return authorization. Note: Software is not returnable or refundable. What Are "Demo Deal" or "B-Stock" Products? Our Demo Deals and B-Stock products offer a unique opportunity to save big on near-mint condition, fully warrantied gear. These items have been opened for demonstration purposes and put back in the box without extended use. All original factory accessories and packaging are included. In addition to the manufacturer's warranty, Demo Deal and B-Stock items also come with an additional 1-year of warranty coverage from Vintage King, free of charge, so rest assured that not only are you saving big by purchasing a Demo Deal/B-Stock item, but you will also receive the same level of world-class support from Vintage King as with the purchase of a factory-sealed unit. Taxes Vintage King collects sales tax for shipments to Alabama, Arkansas, Arizona, California, Colorado, Connecticut, Florida, Georgia, Hawaii, Idaho, Illinois, Indiana, Iowa, Kentucky, Louisiana, Maine, Maryland, Massachusetts, Michigan, Minnesota, Missouri, Nebraska, Nevada, New Jersey, New Mexico, New York, North Carolina, Ohio, Oklahoma, Pennsylvania, South Carolina, Tennessee, Texas, Utah, Vermont, Virginia, Washington, Washington D.C., Wisconsin and Wyoming. Partial and complete tax exemptions may be available in your state. Contact us through eBay for details. Note: eBay may collect sales tax in states not listed above.

Price: 849 USD

Location: Ferndale, Michigan

End Time: 2024-09-01T15:55:10.000Z

Shipping Cost: 0 USD