SCALETRAINS SXT33350 HO CHICAGO NORTHWESTERN GP-30 FACTORY DCC & SOUND #817

Description: The gentleman had it in a display case. like new condition. Track tested and runs great. Rivet Counter HO Scale EMD GP30, Chicago & NorthWestern/OY Scheme Road Number Specific ScaleTrains All-new model Era: 1963 to 1986 Series 810 to 823, built 4/69, Phase Ie Road numbers 812, 815, 817, 819, and 823 OY Scheme battery box doors, front kickplates, sides of the traction motor blower duct, and rear kick plate are painted yellow Road number 821 OY Scheme Repaint battery box doors, front kickplates, sides of the traction motor blower duct, and rear kick plate are painted green Fully-assembled Multiple road numbers Operating LED-illuminated ground lights on both sides of locomotive* Operating LED-illuminated hemisphere walkway lights on hood ends, and at end of raised walkway duct* Operating LED-illuminated tricolor front and rear flush-mounted class lights with lenses and raised gaskets** Cab and rear number boards * Front and rear multiple unit (MU) hose catch boxes with footboards 4-hose multiple unit (MU) hose clusters with silver gladhands Semi-scale coupler buffer equipped with durable metal semi-scale Type E knuckle couplers Front and rear straight uncoupling levers without loop handles As-delivered pilot faces without uncoupling lever loop notches Deck-mounted multiple unit (MU) receptacle Short stepwells with see-through steps Handrail set with center gangway chains Front and rear standard drop steps Scale sectioned treadplate detail with EMD early X style pattern 81 GP30 low short hood with ratchet handbrake, square sand fill, and round sandbox cleanouts Hinged battery box doors with early hinges and narrow louvers Early cab sub-base doors with early hinges Front standard EMD LED-illuminated headlight with lenses on number board housing GP30 cab with increased length on left (firemans) side and inverted cab heater vents Detailed cab interior with separate floor, rear wall, seats, and standard AAR control stand Sliding cab side windows Tall mirrors mounted fore and aft of cab side windows on both sides of cab Standard EMD sunshades with long sunshade tracks Lost-wax brass cast Leslie SU-3L-R horn mounted on right side cab eave Accurate hood door and long hood detail Late single-panel inertial compartment Wire inertial air intake grills Tall turbo exhaust stack Non-dynamic brake housing with blanked intakes and fan Late See-through dynamic brake intake grills with horizontal wires through vertical vanes 7-horizontal rib radiator intake grills See-through front and rear 48 radiator fan housings with 8-blade fans; 36 cap-top center radiator fan Straight radiator fan grab iron Square sand fill hatch on top of long hood end Rear LED-illuminated horizontal headlight with lenses Underbody frame rails with separate plumbing Detailed Blomberg-B trucks with square and sloped bearing housings; elliptical springs; end transom detail; separate sanding lines and brackets; and separate swing hanger detail Dimensionally accurate truck centers Speed recorder mounted to second axle on right front truck sideframe Frame-mounted bronze bell No underbody air filter 2,600-gallon fuel tank with vertical gauges and fuel fill in sill skirt; round gauges in fuel tank sides Factory-applied wire grab irons, photoetched lift rings, windshield wipers, trainline hoses with silver gladhands, air tanks, sand hatch covers and more Motor with 5-pole skew-wound armature Dual flywheels All-wheel drive All-wheel electrical pick-up Directional LED-illuminated headlights Printing and lettering legible even under magnification Primary body colors match Tru-Color Paint colors: TCP-108 C&NW Yellow TCP-109 C&NW Green Operates on Code 70, 83 and 100 rail Packaging safely stores model Minimum radius: 18 Recommended radius: 22 DCC & sound equipped locomotives also feature ESU LokSound 5 DCC & Sound decoder with Full Throttle Two (2) cube-type speakers Prime mover sound 16-cylinder 567D3 prime mover sound ESU designed PowerPack withtwosuper capacitors*** Operates on both DC and DCC layouts DC/DCC & sound-ready locomotives also feature: Operable on DC layouts DCC-ready with 21-pin connector * Lighting features operate when using an ESU decoder with appropriate programming while operating using DCC ** Class lights illuminate in white color only in DC operation. Access and changing colors requires an ESU decoder with appropriate programming while operating using DCC ***PowerPack feature only compatible with appropriately programmed ESU decoders operating on a DCC layout

Price: 269 USD

Location: Wautoma, Wisconsin

End Time: 2025-01-17T22:26:32.000Z

Shipping Cost: N/A USD