Taramps Smart 5 bass–0.5 ~ 2 Ohms / Digital Amplifier 5000 Watts Rms 1 Channel

Description: Description SMART 5 BASS amplifier is another Taramps innovation for automotive sound systems. The biggest difference of this amplifier module is its multi-impedance function, that is, it delivers 5000 watts rms of power at any impedance between 0.5 and 2 ohms. It is a mono amplifier, with a power of 5,000 watts rms, which has protection against short circuit at the output, high/low voltage and thermal protection. It has an indicative logo that, for example, tells you what power is being delivered during the amplifier's operation, providing greater reliability for your system. The versatility you are looking for in your sound system is here! Operation class: class d. It is the construction indication of an amplifier, class d (also called digital) due to the pwm (pulse width modulation) used in its operation, it allows a small, efficient amplifier with reduced heating compared to other construction classes . Number of channels: 01. Number of channels to use in your project, with this specific model you have the option of connecting only 1 channel. Power @14.4v 0.5 ohm: 5000w rms. The power with a voltage of 14.4 volts is related to the operation of the vehicle/power source. Power @14.4v 1 ohm: 5000w rms. The power with a voltage of 14.4 volts is related to the operation of the vehicle/power source. Power @14.4v 2 ohms: 5000w rms. The power with a voltage of 14.4 volts is related to the operation of the vehicle/power source. Power @14.4v 4 ohms: 2700w rms. The power with a voltage of 14.4 volts is related to the operation of the vehicle/power source. Minimum output impedance: 0.5 ohm. Association with the final result of speakers, where, for example, we can connect four 2 ohm single coil subwoofers and two 2 ohm double coil subwoofers to the channel for this result. Minimum output impedance: 1 ohm. Association with the final result of speakers, where, for example, we can connect two 2 ohm speakers or four 4 ohm speakers to the channel for this result. Minimum output impedance: 2 ohms. Association with the final result of speakers, where, for example, we can connect two 4 ohm speakers or just four 8 ohm speakers to the channel for this result. Minimum output impedance: 4 ohms. Association with the final result of speakers, where, for example, we can connect two 8 ohm speakers or just one 4 ohm speaker to the channel for this result. Minimum input sensitivity: 0.2v ~ 4v. Lower voltage required for maximum results with the amplifier, that is, with low volume on the radio, we will achieve good results. Frequency response: 8hz ~ 200hz(-3db). With the frequency response it is possible to identify the application of the amplifier, so if the speaker or any other type of transducer you are using is understood within this response, it means that we can use that product in your project. Variable crossover low pass (lpf): 60hz ~ 200khz. Lpf or low pass filter (term in English) means low pass filter, that is, it allows everything below this reference to be reproduced and what is above this indication will not be used, a common use of this function is to reduce the presence of voice on subwoofers. Variable high pass crossover (hpf): 8hz ~ 30hz (-12db/8th). HPF or high pass filter (term in English), meaning high pass filter, that is, it allows everything above this reference to be reproduced, the common use of this function is to reduce the presence of bass in door speakers, for example . Bass boost: frequency: 35hz ~ 55hz boost: 0 ~ 10db. Bass boost is the bass reinforcement for the amplifier's sub channel, that is, an "extra" reinforcement for the bass. Supply voltage: 9.5 to 17v. It is the operating indication of the amplifier where it will have the minimum and maximum voltage for its operation, outside of this specification it will not turn on or activate protection. Consumption at rest: 2.60a. This is the reference for the consumption of the amplifier turned on and without music. Maximum musical consumption: 230a @ 0.5 ohm | 215.5a @ 1 ohm | 210a @ 2 ohms. This is the estimated consumption of the amplifier working at the minimum impedance playing music at maximum volume. Maximum consumption in sinusoidal signal: 461a @ 0.5 ohm | 431a @ 1 ohm | 420a @ 2 ohms. Reference for bench/laboratory tests under specific conditions with resistive load, fixed frequency and stable power supply. Protection system: output short circuit, low/high voltage protection and thermal protection. This system exists to protect the operation of the amplifier. It can be related to the output, when we have connections below the minimum impedance, a short circuit in the installation or even speakers with problems. This protection may also occur due to voltages outside the operating range, or even thermal protection that occurs due to conditions in which the amplifier heats up above normal. Dimensions: width 23.8cm x height 7.1cm x depth 42.7cm. Extreme product dimensions. Weight: 5.8kg. Gross weight of the amplifier. Package content: 1 smart 5 bass amplifier module; 1 m1 LED monitor; qr code to download the manual; 1 taramps sticker. Important: We recommend that installation be carried out by a specialized professional and we are not responsible for misuse of the product.

Price: 442 USD

Location: Sao Paulo

End Time: 2025-01-15T11:29:56.000Z

Shipping Cost: 139.9 USD