US Wantai 1axis cnc kit Nema42 Motor3256oz-in =23n.m &driver DQ2722MA 9.8A peak

Description: This item includes: 1 PC Nema 42 stepper motor with 23N.M=3265oz-in for Single shaft, 110BYGH150-001 1PC Stepper Motor Driver DQ2722MA 1, Stepper Motor Technical SpecificationsPart No.: 110BYGH150-001 Single shaft Frame Size: NEMA42Step Angle: 1.8 degreeVoltage: 5.44VDCCurrent: 6.8 A/phaseResistance: 0.8Ohm/phaseInductance: 15mH/phaseHolding torque: 23N.M 3256oz-inRotor inertia: 1090 g-cm2 Number of Wire Leads: 4Weight: 8.4kgLength: 150mmRED A+GREEN A-YELLOW B+BLUE B- 2. stepper motor driver:DQ2722MA Introduction The DQ2722MA is full digital 2 phase stepper driver based on DSP control. The drive voltage of which is from 110V to 220VAC. It is designed for use with the 2 phase hybrid stepper motor of all kinds with 86mm to 130mm outside diameter, regulated phase current1.0A to 9.8A. The circuit that it adopts is similar to the circuit of servo control which enables the motor run smoothly without noise and vibration. The highest micro step is 60000ppr. It is widely used in middle and big size numerical control devices such as curving machine, CNC machine, computer embroider machine, packing machine and etc. Feature High performance, low price 16 channels constant angle, constant torque micro steps, highest micro step: 60000ppr Highest response frequency: 200Kpps Current of winding will be reduced by approximately 50% when no step pulse command is received for 0.1 second Opto-isolated signal I/O Drive current is adjustable in 16 channels from 1.0A/phase to 9.8A/phase Single power supply from 110V to 220VAC Phase terminal memory function (motor phase terminal is memorized after input pulse train stopping 5s and it is recovered when stepper driver power on or signal MF changes from low level to high level)

Price: 224.66 USD

Location: Rowland Heights, California

End Time: 2024-11-17T07:23:55.000Z

Shipping Cost: 0 USD