Weld On "DB3" Rear Control Arm Correction Bracket, Jeep JK Wrangler

Description: HOME PAGE ABOUT US ALL PRODUCTS ADD US Weld On "DB3" Rear Control Arm Correction Bracket, Jeep JK Wrangler Description Tech Installations About Shipping/Returns Features include: Fits JK Wranglers 3/16" Steel CAD Designed Laser Cut Ready To Be Welded Fixture Spacers Included Angled for Approach & Departure Trail-Tested Built-In Skid Plate Raw Metal Finish Made in the USA MADE IN USA - Not an imported product, 100% in house Engineered, Designed, Tested and CNC Manufactured right in our Northern California 70,000 Sq Ft plant and warehouse. LIFETIME CUSTOMER SERVICE - Metalcloak provides lifetime customer service and support. If you have any problem whatsoever with your product, simply contact us and we will find a way to make it right. The MetalCloak Jeep JK Weld On "DB3" Rear Control Arm Correction Bracket System is the best solution to convert your long arm system back to a mid arm set up. The MetalCloak DIY weld-on bracket allows for you to convert your rig back to a mid arm set up and re-positions the rear control arms to operate within a corrected radius. This system drastically reduces the feel of bump-steer/axle steer on lifted Jeeps and provides handling characteristics comparable if not better than a stock height Jeep. The Weld-On DB3 welds directly to the stock location of the factory rear control arm frame brackets that were cut off when installing a long arm kit. The weld on DB3 allows you to fully weld the bracket to the frame and is angled for approach and departure when off-roading. The weld on DB3 comes with fixture spacers that allow you to adjust the parts perfectly to the frame so you know the bracket is aligned when welding. Feel the improvement in acceleration, braking, climbing and steering performance with the DB3. The DB3 is only available from MetalCloak. Note: This alignment bracket is designed to be used with Adjustable rear control arms. Not to be used with stock control arms. Note: This is a weld-on DIY product. Do not purchase this product unless you are prepared to weld onto your Jeep. Note: Builder Parts are intended for your own custom application. There is no implied warranty or instructions for the use of these products; if using any of the builder parts you should be confident of your mechanical skill level and know that you will use at your own risk. Rear Control Arm Correction Bracket "DB3" Green line shows DB3 and how it tucks behind wheel for optimal approach. Red line shows a "typical" Long arm hang up MUCH farther forward increasing the chance for hang up. The DB3 provides superior control arm angles for a better ride AND provides better approach angles over a rear long arm all in a simple bolt on application. Correction Bracket Geometry This product adjust the roll center of your Jeep, and corrects the geometry of the control arms enabling the full use of up and down travel. The entire DIY bracket assembly gets welded together for incredible strength, has built in approach skids, and all surfaces are angled to keep from catching on obstacles. Installs where the factory control arm mounts were located. Fixture Alignment Spacers The weld-together weld on DB3 comes with fixture spacers that allow you to adjust the parts perfectly to the frame so you know the bracket is aligned when welding. What Does It Do? Adding this system improves rear control arm geometry and adjusts rear axle caster for lifted JK Wranglers. The flatter the control arms are the better; the benefits are immediately felt with a smoother ride and stable handling as the roll center has been adjusted. Braking performance also improves maximizing safety along with the comfort and performance of your Jeep JK Wrangler. What's In The Kit? DB3 Correction Bracket Bracket Spacers All Required Hardware Installation Installation Difficulty Difficult Body Modification Welding Time to Install 5 - 6 Hours Technical Specifications Items Details Compatibility 2007 - 2018 JK Wrangler Drop Bracket 3/16" Steel Sheet Steel Coating Raw Designed. Engineered. Proven. At Metalcloak, we don't just hack together a product or two... our team of engineers tackle every project with a long term vision in mind... we don't try to be first to market... we just want to be the best at developing products that meet your needs and exceed your expectations. Our Philosophy... At MetalCloak we are a Systems-Based Company. Our philosophy is to develop systems that work incredibly well together, designing every individual part to function and improve that system. From Computer Aided Design (CAD) of every part, to CNC manufacturing processes, we set a high standard of quality control to ensure that every product will fit your rig the right way every time! And, of course, MetalCloak is a Certified Made in the USA company. Our Greatest Asset... You! Our greatest asset is you, our customer. If we can't make you happy, we have no reason to be in business. If there is EVER a problem you experience with our products or service, we are here to correct it right away! And we will ask lots of questions so we can ensure this never happens again. Shipping Free Shipping in the United States. Excludes PO Box, APO/FPO, Africa, Alaska/Hawaii, Asia, Barbados, Bermuda, Canada, Central America and Caribbean, Europe, French Guiana, French Polynesia, Greenland, Guadeloupe, Libya, Martinique, Mexico, Middle East, New Caledonia, Oceania, Reunion, Russian Federation, Saint Pierre and Miquelon, South America, Southeast Asia, US Protectorates, Ukraine, Venezuela Returns We understand that things happen, but when you receive your shipment from Metalcloak, please inspect it immediately. If it is not the part you ordered, if there is shipping damage or if you decided you don’t like the product, please contact us immediately. Please do not wait 6 months, then contact us deciding that you sold the Jeep and no longer need the product. Or it has been sitting in your garage for a year and now you would like to return it. We are happy to help you sell those products via Craigslist or some other marketplace - just send us a link to the ad and we will share it with our community. All returns or exchanges made within the first 30 days will be accepted, no problem. All others will be scrutinized thoroughly. Products must not have been installed, must be in their original packaging and in like-new condition to receive a refund. All non-warranty refunds will be charged a 10% restock fee. Warranty All MetalCloak products are warranted to be free of defects in material and workmanship for one year from the original purchase date. All products produced by MetalCloak are designed exclusively for off road applications and therefore do not have any warranty or guarantee of performance. No warranty or representation is made as to this products ability to protect the user from injury or death. The user assumes that risk. Because of the wide variety of applications of our products, the effectiveness, warranty and longevity of this equipment are directly related to the manner in which it is installed, used and/or maintained. The entire risk as to the quality and performance of these MetalCloak products is with the purchaser. Working on your vehicle can be a dangerous activity. If you are unsure of what you are doing, please leave mechanical or safety critical work to a skilled mechanic. We take no responsibility for how MetalCloak products are installed. This warranty is non-transferable. MetalCloak's obligation under this warranty is limited to the repair or replacement of the defective parts only; at MetalCloak's discretion. Any costs associated with removal, installation, reinstallation, shipping charges, and incidental or consequential damages are excluded from this warranty. Additional exclusions include product finish, damage due to improperly installed products, damage due to abuse or neglect, products that have unauthorized modifications or alterations, products used in competition, damage due to accidents or other abnormal, excessive or improper use, bushings and other wear items. Should be "Defects in material and workmanship" for MetalCloak 6Pak TM shocks, DuroflexTM Joints and all other suspension components do not include dented cylinders or bent rods caused by impact or abuse. Shock absorbers are considered a wear item; thus diminished dampening resistance is considered normal wear and is therefore not warrantable.

Price: 171.6 USD

Location: Rancho Cordova, California

End Time: 2024-05-23T18:06:22.000Z

Shipping Cost: 0 USD