ZKTeco inbio 460 Access Control kit 4 Door + biometric readers zk, TCPIP RS485.

Description: Super Fast Shipping !!!! ZKTECO Original InBio carries out the matching of fingerprints on the panel, itself. The FR Series of readers transmit fingerprint templates to InBio via RS-485 for fast and accurate matching with templates stored in a data-base. InBio controllers install easily on your network and support both TCP/IP and RS-485 communication. Auto-discovery tool allows setting and modification of network parameters directly and easily. InBio controller firmware can be upgraded in the field. InBio panels stores up to 3,000 fingerprint templates, 30,000 card users, and up to 100,000 events/transactions. InBio is backed up in real-time to an on-board SD card. Data is preserved if power is lost. InBio continues to operate if network connection is interrupted. Along with relay contacts for controlling door locks, easily programmable auxiliary relays can be used for additional control and interface to lights, alarms, annunciators, intrusion detection panels, or even extra locking devices or gate controllers. InBio controllers come in three sizes to suit project needs and reduce the cost of unused capacity. 1-door, 2-door, and 4-door models can be mixed and matched in an optimized system architecture. Anti-Passback, First-Card Opening, Multi-Card Opening, Duress Password Entry, and Auxiliary Input/Output Linkages are built into the InBio controller’s firmware. FeaturesOver-current protection, over-voltage protection, and reversal protection for the power supply and all of the input and output terminalsReliable network system of controllers using either TCP/IP or RS-485 Serial communicationSupports different Wiegand formats, and connects to ZK readers as well as HID, Mifare, and generic ID card readersConnects with a variety of electric locks, sensors, exit buttons, alarm devices, and indicators.Can be integrated with other security systems such as CCTV, Intrusion Detection, Fire Alarm Release, and elevastor Control for total security system. Directly compatible with ZK’s biometric reader controllers.Easy-to-use and intuitive programming with ZKAccess SoftwareSystem management by browser from client PC’s. No need to install software on each clientProgramming of special logic between doors is set up with simple pull down menus. No special scripts or code is required.Management software allows indication of real-time door status and remote commanding of door open/close state. Alarm conditions such as forced open and extended open alarms are reportedAdvanced access control capabilities are built into the hardware, including anti-passback, Dual and multi-Card Authentication, and Duress Mode. ParameterInBio-160InBio-260InBio-460Number of doors controller1 Door2 Door4 DoorNumbers of readers supported4(2 RS-485 Reader, 2 26-bit wiegand reader)8(4 RS-485 Reader, 4 26-bit wiegand reader)12 (8 RS-485 Reader, 4 26-bit wiegand reader) Types of readers supported 26-bit Wiegand and RS485 FR Series Reader 26-bit Wiegand and RS485 FR Series Reader 26-bit Wiegand and RS485 FR Series Reader Number of Inputs 3(exit Device and Door Status, 1 AUX) 6( 2 Exit Device, 2 Door Status, 2 AUX) 12( 4 Exit Device, 4 Door Status, 4 AUX) Number of Outputs 2 (1-Form C Relay for Lock and One Form C Relay for Aux Output) 4 (2-Form C Relay for Lock and 2-Form C Relay for Aux Output) 8 (4-Form C Relay or Lock and 4-Form C Relay for Aux Output) Card holders Capacity 30,000 30,000 30,000 Fingerprint Capacity 3,000 3,000 3,000 Log Events Capacity 100,000 100,000 100,000 Communication TCP/IP, RS-485 and WiFi optional TCP/IP, RS-485 and WiFi optional TCP/IP, RS-485 and WiFi optional Package Dimension 350(L)×90(H)×300(W)mm 350(L)×90(H)×300(W)mm 350(L)×90(H)×300(W)mm Package Weight 3.6kg 3.6kg 3.7kg CPU 32 bit 400MHz CPU 32 bit 400MHz CPU 32 bit 400MHz CPU RAM 32M 32M 32M Flash Memory 128M 128M 128M Power 9.6V-14.4V DC 9.6V-14.4V DC 9.6V-14.4V DC Operating Temp 0-45 °C 0-45 °C 0-45 °C Operating Humidity 20% to 80% 20% to 80% 20% to 80% Fingerprint and RFID Slave Reader for InBIO/F18/F8/TF1700 Access Control IP65 rated rugged waterproof and dustproof structure FR1200, a fingerprint reader with RS485 communication interface works with biometric access controllers and fingerprint standalone access control, including inBIO series controllers, F8 and so on. It offers the function of capturing and transferring fingerprint samples to access control panel. With its IP65 rated rugged structure, FR1200 offers extra durability in all weather conditions including outdoor environments. KIT INCLUDE: 1- Gabinet pro1- InBio 4604- Reader FR 12001- Colector Zk 4500

Price: 1199 USD

Location: Hialeah, Florida

End Time: 2023-10-15T22:09:10.000Z

Shipping Cost: 0 USD